Incoloy A-286
Fe-Ni-Cr precipitation-hardenable alloy for high-temperature fasteners and automotive turbocharger springs.
Introduction
§01 — GeneralIncoloy A-286 is an iron-nickel-chromium alloy strengthened by precipitation hardening. It is the most widely used alloy for high-temperature fasteners, springs and turbine components in the automotive and aerospace industries. It offers a cost-effective alternative to nickel-based superalloys for service up to 700°C.
Cross-Reference
Quick Facts
- UNS
- S66286
- GB
- GH2132
- Density
- 7.94 g/cm³
- Max Service Temp
- 700°C
- Series
- Incoloy
Available Product Forms
§02 — FormsKey Characteristics
§03 — FeaturesTypical Uses
§04 — ApplicationsFrequently Asked Questions
Incoloy A-286 FAQWhat is Incoloy A-286 used for?
Incoloy A-286 is a Incoloy alloy used in Automotive turbocharger springs, Aircraft engine fasteners, Gas turbine discs and blades. It offers Precipitation-hardenable to high strength and Cost-effective vs Inconel grades.
What is the chemical composition of Incoloy A-286?
Incoloy A-286 is a controlled-composition Incoloy alloy supplied to AMS 5731 and AMS 5737. We provide the full mill test certificate with heat-specific chemistry on request.
What forms is Incoloy A-286 available in?
Incoloy A-286 is regularly supplied in Forging, Wire, Spring Wire, Flange, Bar & Rod, Plate & Sheet, Strip. Custom forms and dimensions available on request.
What is the maximum service temperature of Incoloy A-286?
Incoloy A-286 is rated for service up to 700°C. Contact our metallurgy team for specific application recommendations.
Need Incoloy A-286 material?
Request a quote with your specification — grade, form, dimensions and quantity.