Nickel Alloy Plate & Sheet
Hot rolled plate from 3 mm to 80 mm and cold rolled sheet from 0.5 mm, cut to size and shipped under a heat-traceable certificate.
Plate & Sheet Capabilities
§01, OverviewPlate and sheet in nickel, cobalt and precision alloys, from 0.5 mm cold rolled sheet to 80 mm hot rolled plate. Every plate is cut to your outline on the waterjet or plasma table, then delivered pickled, 2B or solution annealed with the offcut still tagged to its heat number.
Key Capabilities
- Thickness
- 0.5 - 80 mm
- Width
- Up to 2,000 mm
- Length
- To 6,000 mm
- Cut to size
- Waterjet, plasma, shear
- Condition
- Hot rolled + annealed, pickled or 2B
Why RAS Thermal
§02, Quality + TraceabilitySizes & Tolerances
§03, Specifications| Type | Range | Note |
|---|---|---|
| Hot rolled plate | Thk. 3 - 80 mm | Width to 2,000 mm, length to 6,000 mm |
| Cold rolled sheet | Thk. 0.5 - 3.0 mm | Width to 1,250 mm, coil or cut length |
| Cut-to-size blank | Any outline to your drawing | Waterjet, plasma or sheared |
Tolerances
- Thickness
- ASTM B127 / B575 limits
- Cut window
- ±0.5 mm waterjet
- Flatness
- 6 mm per 1,000 mm max
- Surface
- Pickled, 2B or ground
Typical End Uses
§04, ApplicationsFrequently Asked Questions
Plate & Sheet FAQWhat thickness range does nickel alloy plate and sheet cover?
Sheet runs 0.5 mm to 3.0 mm cold rolled and plate runs 3 mm to 80 mm hot rolled. Width goes to 2,000 mm and length to 6,000 mm. Every size is rolled and cut to your order, so lead time is quoted against the mill schedule rather than drawn from shelf stock.
Which standard applies to Monel 400 and Monel K-500 plate?
Monel 400 plate and sheet follows ASTM B127 / ASME SB-127, which fixes the nickel-copper chemistry and the mechanical properties for the flat product form. Monel K-500 is age hardenable, so it is supplied against UNS N05500 with AMS 4676 chemistry and the certificate states the aging treatment and the hardness that came out of it.
Can you supply plate cut to a drawing?
Yes. Waterjet holds a ±0.5 mm cut window on 6 mm plate, plasma takes the heavy gauges and the shear handles straight edges. Nesting runs before the cut so a 1,219 × 2,438 mm sheet gives up the most parts, and every cut piece keeps the heat number of the sheet it came from.